The TP-Link WiFi Repeater expands the network range of your main router so you can enjoy an uninterrupted browsing experience. This extender has a very convenient web interface that allows you to perform the tplinkrepeater.net setup and configure a range of settings. If you are looking for instructions on the tp-link repeater installation, this article is a must-read for you.
How to set up the TP-Link WiFi Repeater?
You have two options to set up your tp-link range extender. Either you can use a WPS button placed on the repeater or visit www.tplinkextender.net using your browser.
TP-Link Repeater Installation Using The WPS method
- Before you start, make sure your main router supports the WPS function.
- Try to place both devices closer to each other during the installation process.
- Now, plug in the range extender to a power source and power on the device.
- Locate the WPS button on the tp-link repeater and press it for about 5-10 seconds.
- Similarly, press the WPS button on your main router within a minute.
- Check the status of the WPS LEDs on the repeater as well as on your router.
- A green light LED indicates that the connection between the extender and the router has been made.
TP-Link repeater installation using www.tplinkextender.net
If you need to configure or change the settings of your TP-Link device then you can manually install your repeater using a web browser.
- First of all, connect your TP-Link wifi repeater with your existing modem through the Ethernet cable.
- Use another ethernet wire and connect it from your repeater to a networking device such as a PC or laptop.
- Once connected, plug in all the devices to a power source and turn them on.
- Next, launch a web browser on the connected device and type http://tplinkextender.net in the browser’s address field.
- When a login screen appears, enter the tp-link repeater login credentials in the provided fields. Click the login button to log into the tplinkrepeater.net setup interface.
- Next, choose the Quick Setup and your repeater will start scanning for the available networks.
- Choose a network name that you wish to extend and enter the password for your main router’s SSID.
- Next, you can configure the wireless security settings of your TP-Link wifi repeater from the TP-Link extender setup page.
- Once done, hit the save button to apply the changes.
Unable To Access http://tplinkextender.net? Follow the below troubleshooting tips
- Makes sure your internet connection is working fine.
- Check if the Ethernet wire is securely plugged in from the modem to your tplink range extender.
- Check if the TP-Link wireless repeater and the computer system are connected with the Ethernet cable.
- Make sure the TP-Link default gateway you have entered is correct.
- If you can’t access www.tplinkextender.net, use the TP-Link repeater login IP address.
- Try to clear the cache, and cookies of your current browser.
- Power cycle the tp-link wireless repeater, modem, and your main router.
- If nothing works, reset the repeater to the factory defaults.
Conclusion
If you need further assistance with the TP-Link repeater installation process, you can contact our technical team. Our technical executives are available all day long to provide solutions to your queries. You can get in touch with our experts on our helpline number or via a live chat window.