The TP-Link Archer AX21 AX1800 Dual-Band Wi-Fi 6 Router is among the latest additions to the networking devices portfolio. Promising speeds up to 1200Mbps, this router can be a perfect addition to your home. However, getting it to work will require configuring the network settings and keeping the same in the best shape. This blog will walk you through the steps to resolve issues like the TP-Link Archer AX21 AX1800 Dual-Band Wi-Fi 6 Router not working and more easily.
Common TP-Link Router Issues
Apart from general firmware and hardware issues, there are a lot of other factors that can hamper the device’s connectivity. Here are some issues that you can face with your TP-Link Archer AX21 AX1800 Dual-Band Wi-Fi 6 Router:
- Unable to access the internet
- Low WiFi Performance
- Trouble accessing the TP-Link Archer AX21 AX1800 login page
- Login Password issues
Troubleshooting Archer AX21 AX1800 Dual-Band Wi-Fi 6 Router issues
Unable To Access The Internet
- Turn off the main MODEM and keep it turned off for about 5 minutes. Restart it later and check if the internet is working now. If the MODEM has more than one ethernet port, keep the other ports disconnected.
- Connect the computer directly to the MODEM using an ethernet cable. This will resolve issues with wireless transmission and prevent signal loss. If it doesn’t work, you can contact your ISP(internet service provider).
- Log into the Tp-link router setup page and head to the network map settings. Check if the IP address settings are valid.
- If valid, go to Advanced > Network > Internet, click Advanced Settings, and select Use the Following DNS Addresses. Now, set the primary DNS to 8.8.8.8, and the secondary DNS to 8.8.4.4.
- If invalid, check the hardware connections. If that still doesn’t help, you can contact your internet service provider.
- If you are using a cable modem, log in to the web management page of the router and go to Advanced > Network > Internet > MAC Clone. Select the Clone Current Device MAC option and click on the SAVE button. You can now reboot the modem and the router.
Low WiFi Performance
The WiFi performance of your TP-Link Archer AX21 AX1800 Dual-Band Wi-Fi 6 Router depends on a lot of factors. Here are some tips on how to avoid them and improve the WiFi connectivity:
- Avoid keeping the router in a corner or in a closet-like enclosed space. This will hinder signal propagation.
- Keep the router away from obstacles and electronic and heavy electrical appliances.
- Ensure the router is kept in a central location and at a certain height so the signal reach is not affected.
- The antennas of your tp-link router should be aligned vertically with respect to the ground. This means if you are hanging the router on a wall, the antennas should be aligned upright.
Trouble Accessing The TP-Link Archer AX21 AX1800 Login Page
- Reboot your tp-link Archer and try accessing the login page again.
- If the computer is set to Static IP settings, change it to obtain the same automatically/automatically. Head to the network settings to edit the same.
- Verify that the default web address http://tplinkwifi.net is entered correctly in the web address bar. If the web address doesn’t work, you can also use the IP address http://192.168.0.1 or http://192.168.1.1 to access the page.
- Use a different web browser and try accessing the login page again. You can also try disabling the network adapter and using it again.
TP-Link Archer AX21 Login Password Issues
- You can refer to the default password details available on the product label of the device. If you haven’t changed them, you can use the same to log into the router.
- You can connect your tp-link Archer AX21 AX1800 directly to a computer using an Ethernet cable. Log in to the tp-link router setup wizard using http://tplinkwifi.net, and go to the Wireless page to change the wireless network password easily.
Admin Password
- If you are using a TP-Link ID to log in to your Tp-Link Archer router, click on the Forgot password button you see on the login page. Follow the instructions to reset the same and use the new details to log in.
- You can also reset the router to factory settings by pressing and holding the Reset button on the rear for about 6 seconds until the Power LED blinks. Allow some time for the router to reboot and then reconfigure the admin password settings.