Networking devices such as the TP-Link extender require proper maintenance. A crucial maintenance step is always keeping the firmware up-to-date. Updating the firmware of the TP-Link extender is essential, as it eliminates any issue with the extender. If there’s any issue you are facing with your extender, upgrading the firmware is likely to fix it. What’s more, it might even bring new features to the extender. However, when the TP-Link extender not updating firmware, it could raise critical issues with the extender.
If you are facing the same issue, don’t worry! We have brought you this post to help you figure out the problem with your TP-Link extender. We will discuss the troubleshooting methods for the TP-Link extender not updating firmware.
How To Update TP-Link Extender Firmware?
Before we troubleshoot the issue, let’s figure out the procedure for the TP-Link extender firmware update. There are two ways to update the firmware of the extender; one is manual and the other is automatic. The methods are as follows:
TP-Link Extender Firmware Update Automatically
- Primarily, connect a device to the extender’s network and open a web browser.
- Now, enter the IP address of the extender in the address bar.
- When the login page appears, enter the username and password to log in.
- After logging in, go to ‘Tool’ and to the ‘System’ section.
- Here, go to the ‘Firmware Update’ page.
- Now, if there’s the latest one available, you can click on ‘Update’ to initiate it.
- At last, the upgrade will begin.
- Do not turn Off or interrupt the upgrade in any way, as it can cause serious issues.
- If this method isn’t working, you will have to upgrade the firmware manually.
TP-Link Extender Firmware Update Manually
- First of all, go to the TP-Link support page and download the latest firmware file.
- You will require the model number of your extender to download the firmware file.
- Ensure you are downloading the correct firmware file.
- Now, log into the user interface of the extender.
- After that, navigate to ‘Tool’ and go to the ‘System’ section.
- Now, go to the ‘Firmware Upgrade’ section and select the file you have downloaded.
- Finally, click on ‘Upload’ to upgrade the firmware.
- Ensure to avoid interrupting the extender during the update to avoid any issues.
We hope you have understood how to update TP-Link extender firmware accurately. If you are unable to go through this further, we’ll discuss the troubleshooting methods.
How To Fix TP-Link Extender Not Updating Firmware?
To troubleshoot the TP-Link extender not updating firmware, follow the steps below:
- Firstly, go to the website’s support page and download the latest firmware version.
- After that, extract the file with the help of the unzip tools such as WinZIP or WinRAR.
- Now, log into the extender’s user interface using your login credentials.
- You should also save a backup file of the settings.
- The firmware upgrade will clear out the settings of the extender.
- Hereon, you need to upload the zipped file to update the extender.
Now, the firmware should upgrade correctly.